acer iconia pau30 драйвера

Acer Iconia One 10 B3-A30 USB Driver helps in connecting the device to PC. On this page, Android USB Drivers provide official Acer Iconia One 10 B3-A30 drivers along with ADB Driver and Fastboot Driver.

Having trouble connecting Acer Iconia One 10 B3-A30 to PC? It might be a driver problem, so just download Acer USB Drivers and install them on Windows 10, 7, 8, 8.1 or XP PC. The Acer Iconia One 10 B3-A30 USB Drivers provided here are official and are virus free. Based on your need download USB Driver for Acer Iconia One 10 B3-A30 from the downloads section and install it on Windows PC by following the instructions provided below.

With Acer Iconia One 10 B3-A30 USB Driver installed on PC, we can establish a secure connection between Computer and Mobile. This helps in transferring data like images, video, documents and other files to and fro from Mobile to PC. We have also provided Acer Iconia One 10 B3-A30 ADB and Fastboot drivers which helps in passing commands to Phone via Command Prompt (CMD).

The Acer Iconia One 10 B3-A30 USB Driver provided below can be used for both flashing Stock Firmware and other stuff, and also for normally connecting Acer Iconia One 10 B3-A30 to Computer or Laptop.

Очередь просмотра


  • Удалить все
  • Отключить

YouTube Premium

Хотите сохраните это видео?

  • Пожаловаться

Пожаловаться на видео?

Выполните вход, чтобы сообщить о неприемлемом контенте.


Не понравилось?

I spent a lot of time installing and testing Windows 10 on my ICONIA 6120 / PAU30 / 484G64ns over and over.
I can report that it is actually a very simple upgrade apart from a few issues that need to be solved and a few remaining instabilities, so I wanted to share my solutions with fellow ICONIA owners.

I recommend reading the entire how-to before starting the upgrade!

The basic installation method:

1. Make sure you have a backup of all your files and a copy of the Recovery CD that contains the installers for all ICONIA applications; Device Control, Touch Engine, Application Suite, etc.
If you don not have the CD, you can download it here:!qENUDbiD!ZJKxnU1.

2. Update to BIOS v1.07 prior to the Windows 10 Update
BIOS update can be found on the Acer Support website:
Direct Link:

3. Update to Windows 10 from the previously installed Windows version to achieve the Digital Entitlement Licence for Windows 10.

4. Clean install Windows 10 from a DVD or USB media to regain drive space and start fresh.

Drivers I installed:

Luckily almost all of the drivers for the ICONIA actually come standard with Windows 10, even the touchscreen can be used during the setup!
But I noticed that a few features worked better with drivers from the Acer Support website installed.
Link to the support website, just enter «ICONIA» in the «Search by Product Model» field:

1. USB_Renesas_2.0.4.0_W7x64_A
— I found that after Installing this the USB3 Port graphic in the Settings
Direct Link:

2. Touch_Cypress_1.3.13.0_W7x64_A
— Not sure if this is needed, or even makes a difference, the touchscreens work without it as well, but I installed it so I am listing it here.
Direct Link:

Software I installed:
— I only installed the most essential applications as I don not need more, but feel free to install as you see fit, however I can not guarantee that everything will work as stable as it does in my case.

1. Device Control

3. Application Suite

Settings to modify:

1. Do driver updates, Windows 10 will do this automatically, but it can take a while and several re-boots

2. Right-click anywhere on the desktop

3. Click «Graphics Properties», this should open up the «Intel Graphics and Media Control Panel»

4. Choose «Advanced Mode»
— You can activate «Do not show this dialog again.» if you wish to keep Advanced Mode in future

6. Switch to «Multiple Displays» in the «Display» section
6a. Set «Operating Mode» to «Extended Desktop»
6b. Set «Primary Display» to «Built-in Display»
6c. Set «Second Display» to «Built-in Display 2»
6d. Drag Display «1» exactly above Display «2» in the «Position» Section

7. Switch to «General Settings» in the «Display» section
7a. Set «Diplay» to «Built-in Display 2»
7b. Set «Resolution» to «1366 x 768»
7c. Set «Color Depth» to «32 Bit»
7d. Set «Refresh Rate» to «60 Hz»
7e. Set «Rotation» to «Rotate to 180 Degrees»

8. Click «Apply» and «OK» at the bottom of the window to save the settings.

Touch Screen:
— You will need to connect an external Keyboard

1. Go to «Tablet PC Settings»

2. Click «Setup» in Display — Configure

3. Touch the first display

5. Touch the second display

If you receive a bluescreen with error «MEMORY_MANAGEMENT» when tapping on the top monitor:

1. Right-click on the taskbar and select «Properties»

2. Remove the checkmark for «Auto-hide the taskbar» in the «Taskbar» tab

3. Click «Apply» and «OK» to save the settings

Unsolved Problems:
Bluescreen with error «MEMORY_MANAGEMENT» when returning from Sleep.
Ghosting of the touch-screen when moving the laptop.

If anyone has found a solution to any of these problems or has more experience to share, please post in the comments below and I will add it to the list.

Комплект драйверов для Acer Iconia под Windows 7 (x64)

Комплект драйверов для Acer Iconia под Windows 7 (x64)

Компания Acer представила планшет нового поколения Iconia, в котором не один а два сенсорных дисплея. Стоит отметить некоторую схожесть устройства с нетбуком Toshiba Libretto W100 и планшетом Microsoft Courier. Первой страной, в которой появится Acer Iconia, станет Англия. Ожидаемая цена изделия около £1500.

Комплект драйверов для ноутбука Acer Iconia Tab W500 ( A500 , W500P ) под Windows 7

Комплект драйверов для ноутбука Acer Iconia Tab W500 ( A500 , W500P ) под Windows 7

Именитая компания Acer предьявиля публике новинку — Iconia Tab W500. Данная модель есть два сновных преимущества по сравнению с аналогичными планшетами, на базе Windows, других брендов: прикрепляемая полноценная клавиатура и оболочка интерфейса Acer Ring, позволяющая работать с планшетом привычным способом.

Оцените статью
Все о Windows 10
Добавить комментарий

Не копируйте текст!